#rdmironworks Photos and Videos

2,573 Posts

Top Posts

4500 inches of little flames...16g submerged. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #THERMALDYNAMICS  #SIGN  #DOWORK  #MADEINTHUSA  #WALLART  #I ...

4ft sign coming up. 11g steel. Nice and crispy. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #SPARK  #THERMALDYNAMICS  #WORK  #MADEINTHUSA  #WALLART  #...

Theft deterrent lock setup on the safe door. #RDMIRONWORKS  #FABRICATION  #SAFE  #BANK  #CNCPLASMA  #METALART  #METALFAB  #GRIND  #STEEL  #MERICA  #MADEINTHUSA  #HUSTLE  #ART  #DESI ...

The soothing sound of 932 Bronze in the lathe... #RDMIRONWORKS  #FABRICATION  #GRIND  #HUSTLE  #METALFAB  #LEBLOND  #TOOL  #CUSTOM  #INSTAMACHINIST  #USA  #STEEL  #LATHE  #METALART ...

Planishing hammer build in the final stages. Have a faceplate and stand left to fabricate. Then of course turn a set of various dies in the lathe. #RDMIRONWORKS  #FABRICAT ...

Load of white oak and red oak going to the sawmill. These avg 24" across, 9-14 ft long. These trees were taken down by a wind storm a couple of months ago at our new hous...

Each letter cleaned on belt sander and mocked up in position.. Big thank you to @rdm_ironworks  for the plasma cutting. 😎👍🤘

Got some groomsman gifts made up ! Everyone check out @rdm_ironworks.  Awesome work and great dude to work with. Thanks again Bobby! #rdmironworks  #handforged 

Recent Posts

Superlift Suspension Systems. High quality products Made in the USA. Buy #AmericanMade  every chance you get. #RDMIRONWORKS  #FABRICATION  #GM  #METALFAB  #SUPERLIFT  #FOXRACI ...

Not a very detailed example of some of the artwork I have to redraw, this one took about 45 mins. Sure you could transfer the image to illustrator and live trace it, then...

Redrawn from a cross between atari asteroids and minecraft block artwork. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #CAD  #CUSTOM  #FABRICATION  #SIGN  #...

One of the many examples of "clean" artwork sent to me that I have to redraw for signs several times a week. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  ...

So powdercoating the K5 frame didn't work out, and since tommorrow is the only day for the next week and a half over 50°, and the show must go on Sandblasting Sunday hap...

Heavy handmade and engraved 6" door hinge from 1851. I have to make 8, 8" versions of these out of 1/4" steel for a historic house restoration. Made this one from 1/4" s...

Lower water level makes for a dramatic smoke show with the cold weather. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #SMOKE  #THERMALDYNAMICS  #WO ...

4ft 11g P&O sign for The Shabby Shak. Think it will be mounted on some distressed wood at her shop. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #S ...

4ft sign coming up. 11g steel. Nice and crispy. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #SPARK  #THERMALDYNAMICS  #WORK  #MADEINTHUSA  #WALLART  #...

"Rings of Fire" I CNC Plasma cut for a custom piece of back lit metal art by @tybbarnes  coming soon. 4500 total cut inches. 16g steel. Can't wait to see it finished. #RD ...

1 of 5 different size ID "Rings of Fire" for a piece of back lit metal art by @tybbarnes  coming soon. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  ...

4500 inches of little flames...16g submerged. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #FIRE  #THERMALDYNAMICS  #SIGN  #DOWORK  #MADEINTHUSA  #WALLART  #I ...

Paint finished, reclaimed wood in the center, aka pallet wood and old fence boards ripped to width. Adhesive and brad nails should keep them secure. Crown molding next in...

Today's video feature on your classic @rdm_ironworks  ・・・ Short video of drilling pilot holes for 8x170mm to 8x6.5 conversion, Plasma cut a locator ring with both patter...

Flying Wheel art I drew for the office wall and finished off the skeleton on the 10g PnO sheet on the table. 12" tall... #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #ME ...

Flying wheel I drew for the office wall. This one is about 12" tall. Will probably make a 4ft one with a whole lot more detail one day. #RDMIRONWORKS  #METALFAB  #TORCHMATE ...

Just got done drawing this for a customer about to cut. 18" wide, 10g PnO. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #THERMALDYNAMICS  #SIGN  #SCROLLWORK ...

Sign ready to go. 44" wide, 10g PnO with a cup brush finish. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #METALART  #ART  #THERMALDYNAMICS  #SIGN  #SCROLLWORK  #MADEINTHUSA ...

Just got done drawing this for a customer. He said just make it cool...it was either Scrollwork or Tribal 😂😂 so I decided the scrollwork would be more timeless. Bout to...

Power Cross feed with bitcoin meter came as standard equipment on this lathe. #RDMIRONWORKS  #FABRICATION  #GRIND  #HUSTLE  #METALFAB  #LEBLOND  #TOOL  #CUSTOM  #INSTAMACHINIST  ...

Facing some 2.5" for a pair of tree bark texture spring swages. Gonna cut and grind the texture grooves into the faces, do the orange glow thingy in the forge, and weld a...

Snolo dropped by this morning...slid up in his candy flaked '64 on iced out triple chrome spokes. He said he's not here for a long time but he's here for a good time...@p... 

Pair of forged wrench knives shipping out tommorrow. About a week left to put in an order for delivery by Christmas. Message me for info. Thanks #RDMIRONWORKS  #BLACKSMI ...

Rotors drilled from 8x170mm to 8x6.5 conversion for DANA 60 swap into @IANC21  Jeep. Wheels and Rear end are 8 lug Chevy Pattern. Gonna be a beast. #RDMIRONWORKS  #METALFA ...

New 8x6.5" pattern is done. Going to clearance the back side and press in the new studs tommorrow. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #FABRICATION  #FORD  #CHEV ...

Short video of drilling pilot holes for 8x170mm to 8x6.5 conversion, Plasma cut a locator ring with both patterns. Then studs come out, ring goes away, and then 3/8"dril...

8x170mm to 8x6.5, now for the rotors. #RDMIRONWORKS  #METALFAB  #TORCHMATE  #CNCPLASMA  #FABRICATION  #FORD  #CHEVY  #DODGE  #JEEP  #OFFROAD  #ROCKCRAWLER  #OUTDOORLIFE  #MUD  #SUPER ...

8x170mm to 8x6.5. Plasma cut a locator ring with both patterns. Drilled and chamfered. On to hub number 2, and a set of rotors. Slight relief on the back half of the hub...

8x170mm to 8x6.5. Plasma cut a locator ring with both patterns. .1/4" pilot holes lined up and drilled all the way around. Knock out the studs and drill the correct size ...

Cutting some axles down for @model_a_shane  and his nasty big block rat rod. #RDMIRONWORKS  #FABRICATION  #GRIND  #HUSTLE  #METALFAB  #LEBLOND  #TOOL  #CUSTOM  #INSTAMACHINIST  ...

'64 SS. I did a frame off 23 years ago. My very first Hot Rod and one that will always be around. #RDMIRONWORKS  #FABRICATION  #64IMPALA  #SS  #CHEVROLET  #METALFAB  #CUSTOM  #...

Light sanding in a day or two, then paint, reclaimed wood in the center, and crown molding. I can't stand far enough back to take a good pic. I'm gonna call this 95% comp...

ХЕЛЛБОЙ Hellboy Работы мастера 👉🏻 @serjmetiz  @serjmetiz  #serjmetiz  #ночныеволки  #НВ  #байкеры  #aniran  #top  #tøp  #дневникхача  #metalart  #metal  #metalsculpture  #deco ...

🔥FOR SALE🔥I have 3 forged wrench knives left out of the last batch. They are $75ea + $8 shipping in the US. Message me or comment if you want one. They will go fast. C...

Final edge on these tomorrow and a few highlights with the belt grinder. #RDMIRONWORKS  #BLACKSMITH  #IRON  #FIRE  #HAMMER  #1913  #NAZEL4N  #HANDMADE  #WRENCH  #KNIFE  #WRENCHKN ...

Warm up with light blows on some 1" solid square on this chilly day. video is 2 mins compressed into 15 seconds. Running a few hot bars through the 500lb Nazel 4N not onl...

Tristan's workshop in the office...I don't know why those lil Vans footprints are so funny. I need to build him a proper mini garage so he can work on his cars and choppe...

Forged bottle opener by @rdm_ironworks , check out his work...#photooftheday  #metalart  #bottleopener  #forged  #rdmironworks  #custom  #iron  #fire  #ironworks  #blacksmith 

When that 3rd and final chunk of dirt gets in yer eye... #RDMIRONWORKS  #FABRICATION  #YEOLDEMUDSCRAPER  #3 .5FTOFDIRTSCRAPINGGOODNESS #EYESAVER  #PRICELESS  #TOOLS  #USA  #FIT  ...

Forged wrench knife getting shaped up a lil before it goes back in the forge for a final heat... If you're interested in ordering one, or a set, or a hundred, orders and ...

At first glance this Lincoln Continental seems average, but when you see that tag tho... #RDMIRONWORKS  #OLDSCHOOL  #WHIP  #LINCOLN  #CONTINENTAL  #MUSTARDANDMAYO  #YOUALREADYK ...

Just cut this scrolly B for a customer's gate. #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #USA  #FIT  #METALFAB  #HUSTLE  #MADEINTHEUSA  #INTERIOR  #EXTERIOR  #DESIGN  #CRAFTSMAN ...

Processing some forged wrench knife orders this week. If you're interested in ordering one, or a set, or a hundred, orders and payments can be made though PayPal. Message...

Modified this trailer hitch rack to hold a power chair for a customer. Mesh floor, wider end for the back wheels, and a 30" ramp. 3" flat bar bent in the brake for the s...

Running @preferred_abrasives  80 grit Firestorm Ceramic belt in my grinder this afternoon rounding edges on some 1x1/4" flat bar for a project. I bought their big belt kit...

So my @texashotrods  shirt came in the other day and I could barely find it it the package lol... Thanks for the stack of badass shop schwag @rdm_ironworks  @popeofweldin... 

So my @texashotrods  shirt came in the other day and I could barely find it it the package lol...Thanks for the stack of badass shop schwag @popeofwelding  @jessejamesfir... 

Matching pair 6ft tall, 400+lb steel gates. 5/16" steel plate in the center, 4"x2" 3/16" outer frame. Forged bars with a tension latch setup. Wrap around design you can o...

1 of a matching pair 6ft tall, 400+lb steel gates. 5/16" steel plate in the center, 4"x2" 3/16" outer frame. Forged bars with a tension latch setup. Wrap around design yo...

Pink Floyd on that 5:20a.m. drive home from work. Its been one of those weeks that never ends. #RDMIRONWORKS  #FABRICATION  #PINKFLOYD  #F350KARAOKE  #AIRGUITARSUP  #METALA ...

Planishing hammer stand complete for now 6x6x.25" post turned on the diamond to give two more places to mount other tools on the back in a triangulated fashion. 56" botto...

Pair of Script R's for a customer. #RDMIRONWORKS  #FABRICATION  #METALFAB  #CNCPLASMA  #TORCHMATE  #STEEL  #FIT  #GRIND  #HUSTLE  #METALART  #ART  #WALLART  #METALWORK  #CUSTOM  #SCR ...

Symmetry in nature...Beautiful Rustic Sphinx Moth that was hanging out today dodging spider webs. #RDMIRONWORKS  #METALFAB  #RUSTICSPHINXMOTH  #MOTH  #NATURE  #INSECT  #BUG  #...

The soothing sound of 932 Bronze in the lathe... #RDMIRONWORKS  #FABRICATION  #GRIND  #HUSTLE  #METALFAB  #LEBLOND  #TOOL  #CUSTOM  #INSTAMACHINIST  #USA  #STEEL  #LATHE  #METALART ...

"I love it when a plan comes together..."~ John"Hannibal"Smith #RDMIRONWORKS  #FABRICATION  #METALFAB  #HANDMADE  #HAMMER  #STEEL  #METALSHAPING  #MERICA  #RDMUSA  #MAKERSMOVEMENT ...

Concrete Hole saws ready for a new set of teeth. I cut the bad ends off and the customer sends them in to get new cutters added. #RDMIRONWORKS  #METALFAB  #FABRICATION  #ON ...

Flanges for my planishing hammer lower die holder. Needed a .25" gap before they are welded in place. These will provide more than enough clamping action necessary to pos...

Visit norsemerch.com 👉Go to our BIO @iamproudamerican  👉Click our website 👥*Tag someone who can buy for you* Through flood sweat and tears we are texas strong t shirt ...

Start with pic 3, the open can of worms...Customer asked what this fender looked like when the paint started coming off I said, Well if you shot it with buckshot in the ...

Installed the wall section today after a mishap at the powdercoater last week...took a few more pics while we were there. #RDMIRONWORKS  #FABRICATION  #CNCPLASMA  #METALAR ...

CAT track loader repair today. The internal adjuster assembly rides against a 1/2" plate, the factory welds broke and the plate laid down inside. Fixed it by plasma cutti...

Sunday afternoon work. Simple 12'x5' gate framed out of 1.5" 11g. Customer will be adding cedar fence boards on the front. Hinges will be in tomorrow. #RDMIRONWORKS  #FAB ...

Finished rail installed yesterday. Went with a 50% gloss powdercoat on this one. #RDMIRONWORKS  #FABRICATION  #CNCPLASMA  #METALART  #METALFAB  #GRIND  #STEEL  #MERICA  #MADEIN ...

Had to open up a few 1" existing holes to 1.25" in some forklift adapter brackets for a tractor. Turned a steel slug down to 1" with a 1/4" hole in the middle to drop in ...

This huge female golden silk orb weaver had 3 webs in a row. She was camped out in the middle one just waiting on me to go face first into it when I came through there on...

DRILLING is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid materials. The drill bit is a rotary cutting tool, often multipoint. ...

2 down, 4 to go... 3 of them will have mirrored artwork because the panthers will face each other when the big double gates are closed. #RDMIRONWORKS  #FABRICATION  #TORCH ...

1 of 6...36" x 30" Panther Creek signs for their big double drive gates. 16,000+ lines of G Code each. I will roll a 1"x.25" flat bar around the outside edge to give it ...

Just built this 700+lb 1/2" steel industrial table base for a client. All internal welds, mounting plates also inside for anchoring it. Sliding tubing frame work around t...

CNC Plasma cut sign for a gated community. Have 6 more slightly smaller versions to make for their gates. They will all have a 1" x /1/4" flat bar rolled around the outsi...

Brownie's back half had to move out today. Been chilling in the back bay ever since we swapped to a utility bed on @hammer_whisperer  's cross country mobile machinist on ...

Hammered out a new lil sheet metal panel for this rotted fender, ran it through the english wheel, light hand hammering, fits nice. Grind and weld in. 1 more small piece ...

Garbage.... truck fender repair for a customer. The previous owner fiberglassed the gravel, dirt, and the water in there looks like. Anyway, hammer out a new lil sheet me...

Progress pics on the trey ceiling I'm building for our master bedroom. Starting height was 8ft. Step to 9ft, step again to 10 ft. Doubled up 20ft 2x12s running the 18ft s...

Sunset this afternoon on the lake. Sometimes you gotta stop, even if its only 5 minutes, and enjoy God's artwork. #RDMIRONWORKS  #FABRICATION  #METALFAB  #FAMILY  #AMERICA  #...

Stair rail template all fitted for the next job. Now to iron out all the details and see what decorative elements the customer has decided on. #RDMIRONWORKS  #FABRICATION ...

1 year ago today our baby girl Isabella was born. She is such a blessing in our lives. Tristan loves to teach her things, and says he's gonna be the best big brother ever...

A pair of 15ft arch top gates with a wildflower design installed... These were powdercoated brown to match other gates on the property, and will be handpainted on sight b...

73 yr old saw man 60 ft up with boot spikes and rope topping some trees damaged from the storm we had a few weeks ago. Willie said when he was a teenager he cut overgrown...

When people ask if I'm afraid to blow the entire roof outta the master bedroom and build a 10 ft double step trey ceiling... #RDMIRONWORKS  #FABRICATION  #HAMMER  #MILLERWE ...

Hated to cut it but this big tree was hit by 2 more larger trees when the wind took them down. It was rotted inside and leaning at a pretty ridiculous angle over the road...

73 yr old saw man 60 ft up with boot spikes and rope topping some trees damaged from the storm we had a few weeks ago. Willie said when he was a teenager he cut overgrown...

Balcony rail from a few months ago with hammered bars with collars, plasma cut and framed tree center piece. Tricky install on top of that 6" wall cap. #RDMIRONWORKS  #FA ...

Upstairs rail I did a few months ago. Hammered bars with collars, plasma cut and framed tree center piece. 18ft long. Only about 5 ft was actual balcony, the rest was a s...

Upstairs rail I did a few months ago. Hammered bars with collars, plasma cut and framed tree center piece. 18ft long. Only about 5 ft was actual balcony, the rest was a s...

1" thick T1 steel oxy/fuel cut for a customer. #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #CNCPLASMA  #CNC  #OXYFUELCUTTING  #CUSTOM  #SPROCKET  #GRIND  #GEAR  #T1  #STEEL  #MADEINTHE ...

Fireworks show at Alys Beach 30A with the family. Love the summer vacations, the good times, and the great memories we are making with our two awesome children @divinelyh... 

Facing the Nazel 4N upper die on the Lagun Mill with @hammer_whisperer  #RDMIRONWORKS  #FABRICATION  #BLACKSMITH  #IRON  #FIRE  #HAMMER  #1913  #NAZEL4N  #HANDMADE  #USA  #INDUST ...

These 50 yr old chairs were brought in to get the rotted wood replaced with steel mesh. I plasma cut the new bottoms, did some paint removal, then welded them in place. S...

Big sign I made for the front of a customer's barn. #RDMIRONWORKS  #TORCHMATE  #PLASMA  #CNCPLASMA  #METALART  #ART  #HUSTLE  #STEEL  #GRIND  #MADEINTHEUSA  #FIT  #METALFAB  #SIGN  #...

New Frankenstein bolts made for the Nazel 4N. Pre-heat and post-heat on the head, which was a 3" all thread connector cut in half and welded to these hardened threaded ro...

Made an extra sprocket for myself just in case I decide to finish my parts tumbler one year... #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #CNCPLASMA  #PLASMA  #METALFAB  #BRIDGEP ...

Sprocket I cut for this gold mining tumbler. Will be slid on and welded in place. 20 mins to draw, 1.5mins to cut. Chain fits perfectly. #RDMIRONWORKS  #FABRICATION  #TORC ...

Turned a 1" bolt into weld in slugs on the lathe with a shoulder to keep the depth the same on all 6 pieces. These will adapt a Rogue monolift adjustable J-hook setup to ...

Big plasma cut plates pressed into C's, getting drilled and tapped for a retrofit on a squat rack at the Gym. These will adapt a Rogue monolift adjustable J-hook setup to...

Love the iron and wood look. This forged branch insert I made for this outside door matches all the other forged branch rails I did for the house. The inside entryway sta...

Fabricated this steering column tube for a 1929 Franklin out of 1.75 and 2" DOM. The larger sleeve slides over the joint and has an internal 6 point groove I cut with a f...

@thomasj1992  welding the joints on the 3.5" Top-Popper stack system last night. #RDMIRONWORKS  #FABRICATION  #CHEVROLET  #Z71  #CUSTOM  #STACKS  #STACKLIFE  #CUSTOMEXHAUST  #FL ...

Me an @thomasj1992  about to build the mother of all Flutterpop exhaust systems on this Z-71. The 3.5" Top-Popper stack system. #RDMIRONWORKS  #FABRICATION  #CHEVROLET  #Z71 ...

Who doesn't love a lil fire? 😎👍🏈🔥🔥🔥

Raiders fire pit is officially done and being delivered. 😎👍🏈🔥

Repurposed Raiders fire pit all done and ready to burn! Just waiting for the sun to go down so I can get some pics of it lit up. Thank you Bobby @rdm_ironworks  for the lo...

Steel Raiders logo cutout by @rdm_ironworks  for my custom fire pit order. Thanks Bobby! Make sure to check em out for plasma cutting, rat rods, custom fabrication and all...

Team logo for another one of @s.l.kreations  projects headed to Clearlake, Ca. Custom plasma cutting available, signs, brackets, logos, etc. Message me for quotes. #RDMI ...

932 Bronze getting opened up a bit by @hammer_whisperer.  Making new bushings for the big Nazel 4N 100 year service. Nice and crispy... #RDMIRONWORKS  #NAZEL4N  #FABRICATI ...

Rolling a pair of 1.5" squares 14ft long to make a double arch gate top. #RDMIRONWORKS  #FABRICATION  #CUSTOM  #TUBINGROLLER  #HANDMADE  #TOOLS  #TIMESAVER  #STEEL  #DECORATIVE ...

Mark, centerpunch, drill, repeat... #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #CNCPLASMA  #PLASMA  #METALART  #METALFAB  #GRIND  #STEEL  #MERICA  #MADEINTHUSA  #HUSTLE  #ART  #PUZZLE  #...

Each letter cleaned on belt sander and mocked up in position.. Big thank you to @rdm_ironworks  for the plasma cutting. 😎👍🤘

Cutting out a big key puzzle for Escape 601. Also a giant air vent grill thats a passageway through the wall into another room. #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #CN ...

Railroad spike knife blank from @rdm_ironworks  all shaped and pretty dang sharp.. Really liking this knife making stuff.. 🔪🔪😎👍👍

Finishing up a few things before the @hammer_whisperer  gets here tonight to put the Krause touch on the big 1913 Nazel 4N. #RDMIRONWORKS  #FABRICATION  #TORCHMATE  #CNCPLAS ...

Popular Hastags